Ultrasonic Rangefinder Assembly


Ultrasonic Rangefinder Assembly
Stock Number: 34980 MP
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item
$10.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
DATA SHEET


Ranging Module with transducer & LED Display.
Can stand alone or be connected to computer
Can be used to Test 19605-UT (HC-SR04) Ultrasonic Transducer Boards
Onboard STM8S103 microprocessor.
Power: 5VDC
Display: 3 Digit ~38" Red LED
Range: ~ 3-400cm
Resolution: 1cm
Accuracy: ~1% +- 1LSD
Terminals: Power: 2Pin 0.1" pitch micro connector
Ultrasonic Module: 4x0.1" Pitch Female Header
Serial Data Port: 6x0.1" Pitch Header Pins
Serial Output port for conversion.
Vcc,Tx,Rx & Gnd
Requires TTL-USB corversion board
and COM Software (SSCOM3.2E recommened)
L: 1-3/8" W: 1" H: 7/16" WT: .02


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
POWER PLUG WIRED WRONG !
The supplied power plug pigtail is wired wrong. If you connect to 5V, it will blow C1 and C2 surface SMD caps right off the board. That being said... I replaced both caps and rewired correctly. The unit then worked fine and is VERY accurate in its range.
- Jim Schings, KY
 
UPDATE TO MY LAST REVIEW
Called MPJ and they listened and apparently took the item off the shelf. No longer in stock. A shame since it is a super item that works great when the power pigtail is fixed.
- Jim Schings, KY